Yuyao Tenglong Sealing&Packing

Minerals&Metallurgy(2)

Showing 11 - 20 of 20, total 2 pages [First] [Previous] [Next] [Last]

tenglong acrylic ptfe packing
Specification: Usage:Alkalies, mild acids, solvents, steam and oils
Detail: 1. Made from Synthetic Composite yarn, and impregnated with PTFE emulsion (No lubricants or oils),To provide extra chemical resitance.

high quality ramie packing with graphite
Specification: 1.Usage:general dynamic sealing, low pressure valve, etc 2.Tempe
Detail: 1. It is ramie yarn square braided, coated graphite outside, and fully dipped by lubricating oil. 2. The outstanding advantage is an extremely low friction coefficient, does not damage the shaft, anti corrosion, which is comm...

china fiberglass packing with ptfe suppliers
Specification: 1.Density:1.40g/cm3 2.Temperature:-200 up to 280
Detail: 1. It is diagonally braided by C or E-glass fiber yarns which are pre-impregnated by PTFE suspension liquid, afterward it will be re-impregnated by PTFE and lubricated by silicone oil, it is one of the most popular and ideal p...

good quality kevlar ptfe packing
Specification: 1.Temperature: -180to+260C 2.Application media: oils.solvent,dil
Detail: 1. Kevlar PTFE Packing is pure PTFE yarn braided packing incorporated with pure 100% Dupont's Kevlar yarn throughout the four corners. 2. This structure enhances the lubricating ability of Aramid and reinforced the strength o...

good sale corner acrylic kevlar packing
Specification: 1..Density: 1.4-1.45g/cm3 2.Material: graphite, PTFE & kevlar
Detail: Composite Acrylic and Kevlar braided packing was pure aramid filament corners inter braided for strength and abrasion resistance combined with Acrylic composite filaments in the seams to produce a high performance chemically r...

good sale zebra graphite-ptfe kevlar packing
Specification: 1.Temp: -180 to +260. 2.Density: 1.40-1.45.
Detail: 1. Kevlar PTFE graphite packing style 6500G is highly-quality combination of PTFE with graphite incorporated yarn with corner of Kevlar fiber, to prevent gap extrusions within the high pressure and temperature range. 2. Kevla...

high quality kevlar fiber silicone core packing
Specification: 1..Usage: agitators, blenders, mixers, washers etc 2.PH Range: 2
Detail: 1. Kevlar fiber packing with silicon core style 6700SC is combines a resilient silicone rubber core with the heat resistanted Dupont's Kevlar fiber. 2. The elastic rubber core gives the packing better memory, allowing it to...

hot sale ptfe kevlar packing manufacturers
Specification: 1.Temp: -180 to +260. 2. Densty:1.40-1.45.
Detail: 1. Made of Du Pont's continuous filament Kevlar yarn impregnated with PTFE emulsion and processed with lubricant. 2. As the strength and module of Kevlar is as high as the steel-like strength. 3. This packing is co***red wi...

heat resistant ceramic fiber board
Specification: Thickness:12mm-50mm
Detail: 1.Ceramic board insulation are manufactured in a wet vacuum forming process by blending the chopped ceramic fiber with inorganic or organic binders for excellent abrasive resistance at high temperature. 2.Ceramic board insula...

insulation ceramic fiber blanket
Specification: Thickness:10mm-100mm
Detail: 1. Ceramic blanket insulation are made through process of pricking, heat-shaping, cutting and rolling. 2. Ceramic blanket insulation feature high quality of tensile strength, texture uniformity and plane surface, high temper...


Showing 11 - 20 of 20, total 2 pages [First] [Previous] [Next] [Last]
1 2